Changelog V7.0.0.0:
– new images
– Väderstad BioDrill is no longer available, it is now available in the Väderstad-Pack
– 1x new Kotte TSA feeder added
– Triedem 37000l capacity added
– Wheel setups added
– purchasable suction arm with 2 joints and telescopic bar added
– 2 animated rubber cuffs for docking with suction arm added
– color choice added
– Zunhammer SKE 19500 second suction arm added as configurable option
– currently set application rate is stored in the savegame
– Hose System Ready v1.1.0.0
– Dynamic Hoses installed
– Fixed fertilizer levels on patch 1.5.3.1
– Various fixes and improvements
– enclosed file for exchange in the CoursePlay5 -Mod, is stored in the folder _CoursePlay
Copy and paste into CoursePlay folder, replace existing file with it.
This includes the Kotte Feeders, the Field Edge Container, and the Zunhammer Feeder usable with CourePlay for feeding.
– Vehicle configuration for courseplay or hose system selectable, since I’ve found that if manure pits and feeders are equipped with the hose system, using Courseplay blocked the automatic filling at the slurry pit. So in such a case Courseplay can now be used, but the hose system must not be disabled, this can be selected at the Purchase options. This costs nothing, so reconfigurations are free of charge.
– all Kotte TSA feeders have a rear mousecontrol rotatable connection piece for usage with the hose system – Additional cameras with own HUD (rafftnix GUI) installed”
Hello dear Com,
today I can introduce you to my final version of my slurry pack.
Some may already know it from Modhoster. For all those who do not know, here is a small introduction, what the pack can do everything.
The pack serves to make the slurry output as realistic as possible shape. There are some functions that make this possible.
All features are multiplayer and Dedicated and tested.
A big thank you goes to Dj ToBe (Word of Farming Team) for the support at Dediserver-Ready and test. Was really ne great work.
First of all, it is no longer enough to load, just next to the drum and press the R key. You must first use the suction arm in the Insert the rubber studs. For this you need less than 15cm to the cuff center position. The current distance is displayed at the bottom right.
In addition, a hud appears in the lower right, which turns green when you overloaded. Then simply click “Start / Stop Filling” (Intputbinding IMPLEMENT_EXTRA3) press, then go. The overload speed depends on the speed In-game time. That means, if you play in Realtime (1x), then the Pump performance, which also has the barrel in genuine. If the barrel is a 6000l / min pump has filling for 18000l 3min. Has the ingame time 5x then is the Speed ??5x higher. Especially for Dedi servers that play realtime, though the fill goes too slowly, the turbo fill mode (button “Turbo overload active” intputbinding KEY_KP_4) activate. Then the factor can be specified for each barrel in the XML. The default is 15x.
All Veenhuis and Kotte barrels have a purchaseable suction arm.
If you do not buy a suction arm, the filling process can be carried out again by pressing button R.
The suction arm can be pre-positioned by means of the “pipe-fold” function and returned to Park position. The preposition can be over Button “Suction arm pre-positioning further forward” / “Suction arm pre-positioning further back” (Inputbinding KEY_KP_plus / KEY_KP_minus) in the 10-degree grid. The control then goes via Mousecontrol.
The Zunhammer drums have the suction arm as standard.
For filling at the manure pit you can place the docking station in the Gülletrigger, and directly dock with the suction arm at the docking station and “suck” from the manure pit.
If you do not want to use a docking station, fill again with key R.
All dispensers have a variable dispensing control. about Button “Increase application rate” / “Reduce output quantity” (Inputbinding KEY_KP_plus / KEY_KP_minus) the output can be adjusted in m³ / ha (cubic meters per hectare). The Delivery rate is adapted to the vehicle speed automatically.
The cultivators and disc harrows are designed for the Manure Mod. You should have this with you the Manure-Mod use, you get for equal work of the manure 2 fertilizer levels.
If the Manure-Mod is not used, it slips at one level.
All dispensers are switched on and off via “Implement raise / lower”.
The dispensing devices, which can be seen clearly, have parithelium at the hose outlets.
The tow hose rods leave behind the “dung texture”. This can be done with the Vogelsang Swing-Max can be switched on / off using the button “Slurry texture on / off” (Inputbinding KEY_KP_4).
The Vogelsang Swing-Max tubing harness deserves its own heel.
The working width can be adjusted via the button “Split 1 + 10” (Inputbinding KEY_lshift KEY_down) from 30m to 24m.
Use button “Fold partial widths 2 + 9” (Inputbinding KEY_lshift KEY_up) from 24m to 18m.
At 30m working width there are 10 partial widths, Button “Sub – width from right to left” (Inputbinding KEY_KP_7) of right to the left and with button “partial widths from left to right” (Inputbinding KEY_KP_9) from left to right. At 24m, there are 8 partial widths and at 18m 6. Via button “split all connect on” (Inputbinding KEY_KP_8) you can again switch all sub-widths on.
Via button “SwingMax up and down” (Inputbinding KEY_KP_0) you are able to transfer the data raise and lower the rods.
All excavation drums have a telescopic axle that can be bought Button “Telescope axis in / out” (Inputbinding IMPLEMENT_EXTRA2) and 3 tire sets.
If you use the frontdocks, the spreading drum should not have a suction arm. Otherwise there there is overlap in the indication of the distance to the cuff.
Now an overview of all contained vehicles with their functions:
1x docking station
– for filling on the slurry bearing with suction arm
– 2 Animated rubber cuffs for docking with suction arm
1x Frontdock Zunhammer
– Raise / lower hose under tractor via implement / adjust mousecontrol to tractor
– Front camera for easier docking
1x Frontdock Zunhammer Highline
– Suction arm with 2 joints and telescopic
– Raise / lower hose under tractor via implement / adjust mousecontrol to tractor
– Front hydraulics for transport of the docking station or additional front weight
– Front camera for easier docking
1x Kotte field edge container
– 2 Animated rubber cuffs for docking with suction arm
1x built-up roof Terra-Variant Zunhammer TV
– 19000l capacity
– Suction arm with 2 joints and telescopic
– Rear view camera
1x Zunhammer SKE 19500
– 19500 liters capacity
– Buyable telescopic axle
– 3 wheel sets
– Suction arm with one joint and telescopic
– Buyable rubber cuff, thus also usable as a feeder
3x Veenhuis Premium Integral
– 1-axle 16000l capacity
– Tandem 22000l capacity
– Triedem 30000l of capacity
– All available telescopic axles
– All 3 wheel sets
– All purchaseable suction arm with 2 joints and telescopic
– All reversing camera
– Triedem automatic lifting axle Level control (level 25% axis lifted)
3x Kotte TSA feeder
- Tandem 22000l capacity
- Tandem 30000l capacity
- Triedem 30000l of capacity
- All 2 wheel sets
- All purchaseable suction arm with 2 joints and telescopic
- Triedem 2 automatic lift axles Level controlled
(Level 35% front axle lifted, level 10% rear axle lifted)
- All 2 Animated rubber cuffs for docking with suction arm
- All color selection
1x Amazone Catros
- Working width 6m
- Variable application rate 10m³ / ha - 40m³ / ha
- Buyable mounting bracket for intercropping device
- Outflow Particle
- Purchaseable Syncut
1x Zunhammer Vibro
- Working width 6m
- Variable application rate 10m³ / ha - 40m³ / ha
1x Zunhammer Zunidisc
- Working width 6m
- Variable application rate 10m³ / ha - 40m³ / ha
1x Väderstad Carrier XL
- Working width 7.8m
- Variable application rate 10m³ / ha - 40m³ / ha
- Buyable mounting bracket for intercropping device
- Outflow Particle
- Purchaseable Syncut
1x Väderstad BioDrill
- Working width 6m
- Suitable for Amazone Catros
- This means that oil sherry can be sown as intercropping
1x Fliegl Dolly shortened
- 2 wheel sets
1x Vogelsang SwingUp tow hose linkage
- Working width 15m
- Variable application rate 10m³ / ha - 40m³ / ha
- Outflow Particle
- The impact plate is activated
1x Vogelsang SwingMax towing hose linkage
- working width variable 30m / 24m / 18m
- Variable application rate 10m³ / ha - 40m³ / ha
- Outflow Particle
- partial width switching
1x Möscha double distributor
- Working width 15m
- Variable application rate 10m³ / ha - 40m³ / ha
- Outflow Particle
1x IT runner feeder container
- 16000l capacity
- 1 Animated rubber cuffs for docking with suction arm
1x IT runner feeder container
- 24000l of capacity
- 1 Animated rubber cuffs for docking with suction arm
